Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTang, Yuxinen
dc.contributor.authorGong, Dangguoen
dc.contributor.authorLai, Yuekunen
dc.contributor.authorShen, Yiqiangen
dc.contributor.authorZhang, Yanyanen
dc.contributor.authorHuang, Yizhongen
dc.contributor.authorTao, Jieen
dc.contributor.authorLin, Changjianen
dc.contributor.authorDong, Zhilien
dc.contributor.authorChen, Zhongen
dc.identifier.citationTang, Y., Gong, D., Lai, Y., Shen, Y., Zhang, Y., Hu, Y. et al. (2010). Hierarchical layered titanate microspherulite: formation by electrochemical spark discharge spallation and application in aqueous pollutant treatment. Journal of Materials Chemistry, 20(45).en
dc.description.abstractAn ultrafast and template-free method to synthesize three-dimensional (3D) hierarchical layered titanate microspherulite (TMS) particles with high surface area is reported. The synthesis makes use of an electrochemical spark discharge spallation (ESDS) process, during which a fast anodic reaction on the titanium surface creates a layer of titanium dioxide that instantly breaks down by the applied electrical field into the solution in the form of titanium oxide particles. The spalled particles readily react with the heated NaOH electrolyte to form the titanate particles. A typical as-prepared TMS with a diameter of 0.4~1.5 μm is synthesized by ESDS of Ti foils in 10 M NaOH solution under an applied current density of 0.5 A cm-2, leading to a reaction yield of approximately 0.10~0.15 g per square centimetre of exposed Ti foil within 20 min. After hydrogen ion exchange, the surface area can reach as high as ~406 m2 g-1. On the Ti surface, a crystalline rutile TiO2 nanosheet structure is formed, which is attributed to the local exothermic heat caused by the spark discharge. A formation mechanism of the TMS is discussed based on field emission scanning electron microscopy (FESEM), a transmission electron microscopy (TEM) study and Raman scattering spectroscopy analysis. The as-prepared TMS shows excellent adsorption performance compared with a titanate micro-particle (TMP), nanowire (TNW) and nanotube (TNT) when methylene blue (MB) and PbII ions are used as representative organic and inorganic pollutants. The mechanism of adsorption has also been discussed.en
dc.format.extent25 p.en
dc.relation.ispartofseriesJournal of materials chemistryen
dc.rights© 2010 Royal Society of Chemistry. This is the author created version of a work that has been peer reviewed and accepted for publication by Journal of Materials Chemistry, RSC. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [DOI: ].en
dc.titleHierarchical layered titanate microspherulite : formation by electrochemical spark discharge spallation and application in aqueous pollutant treatmenten
dc.typeJournal Articleen
dc.contributor.schoolSchool of Materials Science & Engineeringen
dc.contributor.organizationCollege of Material Science and Technology, Nanjing University of Aeronautics and Astronauticsen
dc.description.versionAccepted versionen
item.fulltextWith Fulltext-
Appears in Collections:MSE Journal Articles
Files in This Item:
File Description SizeFormat 
16. Hierarchical_Layered_Titanate_Microspherulite_revised_2[1].pdf958.74 kBAdobe PDFThumbnail

Google ScholarTM




Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.