Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/94613
Full metadata record
DC FieldValueLanguage
dc.contributor.authorHo, Peng Chingen
dc.contributor.authorYap, Yit Fatten
dc.contributor.authorNguyen, Nam-Trungen
dc.contributor.authorChai, John Chee Kiongen
dc.date.accessioned2012-04-12T09:20:21Zen
dc.date.accessioned2019-12-06T18:59:10Z-
dc.date.available2012-04-12T09:20:21Zen
dc.date.available2019-12-06T18:59:10Z-
dc.date.copyright2011en
dc.date.issued2011en
dc.identifier.citationHo, P. C., Yap, Y. F., Nguyen, N. T., & Chai, J. C. K. (2011). Thermally mediated droplet formation at a microfluidic T-junction. Micro and Nanosystems, 3(1), 65-75.en
dc.identifier.urihttps://hdl.handle.net/10356/94613-
dc.description.abstractThis paper reports the investigation on the process of thermally mediated droplet formation at a microfluidic Tjunction. The temperature field generated by an integrated heater causes changes in properties of the fluids and affects the droplet formation process. The droplet formation process is formulated in this paper as an incompressible immiscible twophase flow problem. The motion of the two-phases is strongly coupled by interfacial conditions, which are governed by the three-dimensional Navier-Stokes and the energy equations. The interface or the droplet surface is described by a narrow- band particle level-set method. The numerical solutions of the problem are obtained with finite volume method on a staggered mesh and validated with the experiment data on droplet formation in the dripping regime of a T-junction. The combined effect of the temperature-dependent viscosities and interfacial tension of the fluids results in a larger droplet at elevated temperature. The effectiveness of the penetration of temperature field induced by different heater geometries that resulted in different incremental change in droplet size over a temperature range is discussed.en
dc.language.isoenen
dc.relation.ispartofseriesMicro and nanosystemsen
dc.rights© 2011 Bentham Science Publishers Ltd.en
dc.subjectDRNTU::Engineering::Mechanical engineeringen
dc.titleThermally mediated droplet formation at a microfluidic T-junctionen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.identifier.doi10.2174/1876402911103010065en
dc.identifier.rims159451en
item.fulltextNo Fulltext-
item.grantfulltextnone-
Appears in Collections:MAE Journal Articles

SCOPUSTM   
Citations 20

9
Updated on Nov 28, 2022

Page view(s) 5

816
Updated on Dec 6, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.