Please use this identifier to cite or link to this item:
|Title:||Polymer pen lithography||Authors:||Giam, Louise R.
Mirkin, Chad A.
|Keywords:||DRNTU::Engineering::Materials||Issue Date:||2008||Source:||Huo, F., Zheng, Z., Zheng, G., Giam, L. R., Zhang, H., & Mirkin, C. A. (2008). Polymer pen lithography. Science, 321(5896), 1658-1660.||Series/Report no.:||Science||Abstract:||We report a low-cost, high-throughput scanning probe lithography method that uses a soft elastomeric tip array, rather than tips mounted on individual cantilevers, to deliver inks to a surface in a “direct write” manner. Polymer pen lithography merges the feature size control of dip-pen nanolithography with the large-area capability of contact printing. Because ink delivery is time and force dependent, features on the nanometer, micrometer, and macroscopic length scales can be formed with the same tip array. Arrays with as many as about 11 million pyramid-shaped pens can be brought into contact with substrates and readily leveled optically to ensure uniform pattern development.||URI:||https://hdl.handle.net/10356/94822
|DOI:||10.1126/science.1162193||Rights:||© 2008, AAAS This is the author created version of a work that has been peer reviewed and accepted for publication by Science, AAAS. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: DOI [10.1126/science.1162193].||Fulltext Permission:||open||Fulltext Availability:||With Fulltext|
|Appears in Collections:||MSE Journal Articles|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.