Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKumar, Palaniswamy Sureshen
dc.contributor.authorNizar, S. A. Syeden
dc.contributor.authorSundaramurthy, Jayaramanen
dc.contributor.authorRagupathy, P.en
dc.contributor.authorThavasi, V.en
dc.contributor.authorMhaisalkar, Subodh Gautamen
dc.contributor.authorRamakrishna, Seeramen
dc.identifier.citationKumar, P. S., Nizar, S. A. S., Sundaramurthy, J., Ragupathy, P., Thavasi, V., Mhaisalkar, S. G., et al. (2011). Tunable hierarchical TiO2 nanostructures by controlled annealing of electrospun fibers : formation mechanism, morphology, crystallographic phase and photoelectrochemical performance analysis. Journal of materials chemistry, 21, 9784-9790.en
dc.description.abstractHighly crystalline hierarchical TiO2 nanostructures of morphology ranging from one-dimensional regular fibers, hollow tubes, porous rods and spindles were achieved from electrospun TiO2/composite fibers by annealing at temperatures ranging from 400 °C, 500 °C, 600 °C, 700 °C, and 800 °C, with a ramp rate of 5 °C min−1, and at a pressure of 1 mbar. Crystallographic structure, crystallite size, surface morphology and surface area of annealed TiO2 nanostructures were analysed by X-ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM) and Brunauer–Emmett–Teller (BET) method. The analysis of post-annealing process on electrospun TiO2 nanofibers showed an orderly change in the crystallographic phase transformation with corresponding change in their surface morphologies. XRD and HRTEM analysis confirmed the phase transformation of highly crystalline anatase phase to rutile with crystallite size varied from 11 nm to 36 nm upon tuning the annealing temperature. Interestingly, TiO2 nanostructures annealed at 700 °C showed the formation of biphasic TiO2 hollow tubes with stoichiometry phase compositions of 45.74% anatase and 54.25% rutile. A possible formation mechanism was proposed based on series of temperature-dependent experiments. To evaluate the potential use of these TiO2 nanostructures, dye sensitized solar cell (DSSC) was fabricated using the post-annealed TiO2 nanostructures as photoanode. A higher conversion efficiency (η) of 4.56% with a short circuit current (Jsc) of 8.61 mA cm−2 was observed for highly ordered porous anatase TiO2 nanorods obtained upon annealing at 500 °C under simulated AM1.5 G (100 mW cm−2), confirming that surface area of TiO2 resulted out of porous structure played dominant role.en
dc.format.extent7 p.en
dc.relation.ispartofseriesJournal of materials chemistryen
dc.rights© 2011 Royal Society of Chemistry. This is the author created version of a work that has been peer reviewed and accepted for publication by Journal of Materials Chemistry, Royal Society of Chemistry. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [DOI:].en
dc.subjectDRNTU::Engineering::Materials::Nanostructured materialsen
dc.titleTunable hierarchical TiO2 nanostructures by controlled annealing of electrospun fibers : formation mechanism, morphology, crystallographic phase and photoelectrochemical performance analysisen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Materials Science & Engineeringen
item.fulltextWith Fulltext-
Appears in Collections:MSE Journal Articles

Citations 10

Updated on Nov 28, 2022

Web of ScienceTM
Citations 5

Updated on Nov 30, 2022

Page view(s) 5

Updated on Dec 5, 2022

Download(s) 5

Updated on Dec 5, 2022

Google ScholarTM




Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.