Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/95170
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLi, Bingen
dc.contributor.authorTran, Cao Thanh Ngocen
dc.date.accessioned2012-08-22T03:43:59Zen
dc.date.accessioned2019-12-06T19:09:32Z-
dc.date.available2012-08-22T03:43:59Zen
dc.date.available2019-12-06T19:09:32Z-
dc.date.copyright2012en
dc.date.issued2012en
dc.identifier.citationTran, C. T. N., & Li, B. (2012). Determination of inclination of strut and shear strength using variable angle truss model for shear-critical RC beams. Structural Engineering and Mechanics, 41(4), 459-477.en
dc.identifier.urihttps://hdl.handle.net/10356/95170-
dc.identifier.urihttp://hdl.handle.net/10220/8414en
dc.description.abstractThis paper attempts to determine the inclination of the compression strut within variable angle truss models for RC beams loaded in shear-flexure through a proposed semi-analytical approach. A truss unit is used to analyze a reinforced concrete beam, by the principle of virtual work under the truss analogy. The inclination of the compression strut is then theoretically derived. The concrete contribution is addressed by utilizing the compatibility condition within each truss unit. Comparisons are made between the predicted and published experimental results of the seventy one RC beams with respect to the shear strength and the inclined angle of the compression strut at this state to investigate the adequacy of the proposed semi-analytical approach.en
dc.language.isoenen
dc.relation.ispartofseriesStructural engineering and mechanicsen
dc.rights© 2012 Techno Press. This paper was published in Structural engineering and mechanics and is made available as an electronic reprint (preprint) with permission of Techno Press. The paper can be found at the following official DOI: [http://dx.doi.org/10.12989/sem.2012.41.4.459]. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en
dc.subjectDRNTU::Engineeringen
dc.titleDetermination of inclination of strut and shear strength using variable angle truss model for shear-critical RC beamsen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Civil and Environmental Engineeringen
dc.identifier.openurlhttp://technopress.kaist.ac.kr/?page=container&journal=sem&volume=41&num=4en
dc.description.versionPublished Versionen
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:CEE Journal Articles

Google ScholarTM

Check

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.