Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/95332
Title: The essential work of fracture and JR curves for the double cantilever beam specimen : an examination of elastoplastic crack propagation
Authors: Atkins, A. G.
Chen, Zhong
Cotterell, Brian
Keywords: DRNTU::Engineering::Materials
Issue Date: 1998
Source: Atkins, A. G., Chen, Z., & Cotterell, B. (1998). The Essential Work of Fracture and JR Curves for the Double Cantilever Beam Specimen: An Examination of Elastoplastic Crack Propagation. Proceedings of The Royal Society of London A, 454(1971), 815-833.
Series/Report no.: Proceedings of the Royal Society of London A
Abstract: The propagation of a crack in a double-cantilever beam (DCB) geometry where there is extensive remote plastic flow both preceding and accompanying fracture is analysed. Experiments show that there is an appreciable path dependence in load-deflection-crack length behaviour because of the remote residual plastic zones left in the wake of the crack front. The deflection for a propagated crack is greater than the deflection predicted by nonlinear fracture mechanics since in real plasticity the plastic deformations cannot be recovered and their ‘energy’ released back into the system. A Griffith energy approach is employed to uncouple the work increments of elastic strain energy, the remote plastic work and the essential crack-tip fracture work. For geometries other than the DCB these components cannot be easily uncoupled. Analyses are given for elastic perfectly plastic solids and for elastic power-law work-hardening materials. There is good agreement with experiments on side-grooved double cantilever beam specimens made from 6082-TF aluminium alloy (which is almost elastic perfectly plastic) and from annealed α-brass (which work hardens appreciably). Varying degrees of elastoplasticity during propagation are obtained by altering the height of the beam arms; globally elastic fracture results are obtained with adequately deep arms. It is found that the load-deflection curves can be predicted by assuming the essential work of fracture at the crack tip is constant, at initiation and propagation, for both these materials. In contrast the JR curves calculated from the load-deflection diagram by the conventional method are dependent on the specimen size because they contain non-recoverable global plastic work.
URI: https://hdl.handle.net/10356/95332
http://hdl.handle.net/10220/8216
DOI: 10.1098/rspa.1998.0187
Rights: © 1998 The Royal Society. This is the author created version of a work that has been peer reviewed and accepted for publication by Proc. R. Soc. Lond. A, The Royal Society. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at: [http://dx.doi.org/10.1098/rspa.1998.0187].
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:MSE Journal Articles

Files in This Item:
File Description SizeFormat 
74. The Essential Work of Fracture and JR Curves.pdf2.1 MBAdobe PDFThumbnail
View/Open

SCOPUSTM   
Citations 10

23
Updated on Jul 13, 2020

PublonsTM
Citations 10

20
Updated on Mar 5, 2021

Page view(s) 1

1,110
Updated on Apr 22, 2021

Download(s) 5

423
Updated on Apr 22, 2021

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.