Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/96093
Title: Inverse system design based on the volterra modeling of a parametric loudspeaker system
Authors: Ji, Wei
Gan, Woon-Seng
Issue Date: 2012
Source: Ji, W., & Gan, W. S. (2012). Inverse system design based on the Volterra modeling of a parametric loudspeaker system. NONLINEAR ACOUSTICS State-of-the-Art and Perspectives, 1474, 383-386.
Abstract: Parametric loudspeaker systems have been widely used for projecting high directional audible sound beams. However, the nonlinear interaction among primary waves also generates harmonics, which distort the desired signal and degrade the sound quality. In order to investigate this inherent nonlinear mechanism, a baseband distortion model is developed from nonlinear system identification using an adaptive Volterra filter. For the conventional double-sideband amplitude modulation (DSBAM) technique, it is found that the harmonic distortion is largely attributed to the second harmonic. The adaptation results derived from both simulation and measurement indicate that the first few coefficients of the second-order kernel are dominant. Based on the Volterra model, a pth-order inverse system is designed to compensate the harmonic distortions present in the demodulated signal. Simulation and measurement results demonstrate that the harmonic distortion can be greatly reduced to an acceptable level when the inverse system is introduced with a suitable recursive order.
URI: https://hdl.handle.net/10356/96093
http://hdl.handle.net/10220/10102
DOI: 10.1063/1.4749374
Rights: © 2012 American Institute of Physics. This paper was published in NONLINEAR ACOUSTICS State-of-the-Art and Perspectives and is made available as an electronic reprint (preprint) with permission of American Institute of Physics. The paper can be found at the following official DOI: [http://dx.doi.org/10.1063/1.4749374].  One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.
Fulltext Permission: open
Fulltext Availability: With Fulltext
Appears in Collections:EEE Conference Papers

Files in This Item:
File Description SizeFormat 
14. Inverse system design based on the Volterra modeling of a parametric.pdf862.25 kBAdobe PDFThumbnail
View/Open

SCOPUSTM   
Citations 50

1
Updated on Mar 6, 2021

Page view(s) 20

538
Updated on Jan 17, 2022

Download(s) 20

279
Updated on Jan 17, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.