Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/96306
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKashaninejad, Naviden
dc.contributor.authorNguyen, Nam-Trungen
dc.contributor.authorChan, Weng Kongen
dc.date.accessioned2013-06-12T02:08:44Zen
dc.date.accessioned2019-12-06T19:28:34Z-
dc.date.available2013-06-12T02:08:44Zen
dc.date.available2019-12-06T19:28:34Z-
dc.date.copyright2012en
dc.date.issued2012en
dc.identifier.citationKashaninejad, N., Nguyen, N. -T., & Chan, W. K. (2012). Eccentricity effects of microhole arrays on drag reduction efficiency of microchannels with a hydrophobic wall. Physics of Fluids, 24(11).en
dc.identifier.issn1070-6631en
dc.identifier.urihttps://hdl.handle.net/10356/96306-
dc.identifier.urihttp://hdl.handle.net/10220/10218en
dc.description.abstractThis paper experimentally investigates the effects of microhole eccentricity on the slip lengths of Stokes flow in microchannels with the bottom wall made of microhole arrays. The wettability of such microhole structures fabricated by the replica molding of polydimethylsiloxane is first analyzed measuring both static and dynamic contact angles. Subsequently, the drag reduction performance of the microchannels with such hydrophobic microhole surfaces is evaluated. The results indicate that the impact of microhole eccentricity on drag reduction performance correlates well with the contact angle hysteresis rather than with the static contact angle. Furthermore, microhole arrays with large normalized width and zero eccentricity show the minimum contact angle hysteresis of 18.7°. In these microchannels, the maximum percentage increase in the relative velocity is 39% corresponding to a slip length of 2.49 μm. For the same normalized width, increasing the normalized eccentricity to 2.6 increases the contact angle hysteresis to 36.5° that eventually reduces the percentage increase in relative velocity and slip length down to 16% and 0.91 μm, respectively. The obtained results are in qualitative agreement with the existing theoretical and numerical models. These findings provide additional insights in the design and fabrication of efficient micropatterned channels for reducing the flow resistance, and leave open questions for theoreticians to further investigate in this field.en
dc.language.isoenen
dc.relation.ispartofseriesPhysics of fluidsen
dc.rights© 2012 American Institute of Physics. This paper was published in Physics of Fluids and is made available as an electronic reprint (preprint) with permission of American Institute of Physics. The paper can be found at the following official DOI: [http://dx.doi.org/10.1063/1.4767539]. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en
dc.titleEccentricity effects of microhole arrays on drag reduction efficiency of microchannels with a hydrophobic wallen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.identifier.doihttp://dx.doi.org/10.1063/1.4767539en
dc.description.versionPublished versionen
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:MAE Journal Articles
Files in This Item:
File Description SizeFormat 
86. Eccentricity effects of microhole arrays.pdf3.25 MBAdobe PDFThumbnail
View/Open

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.