Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/96754
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRuys, Andrew J.en
dc.contributor.authorMaleksaeedi, Saeeden
dc.contributor.authorWang, Jun Kiten
dc.contributor.authorEl-Hajje, Aounien
dc.contributor.authorHarb, Layaleen
dc.contributor.authorGuneta, Vipraen
dc.contributor.authorHe, Zemingen
dc.contributor.authorWiria, Florencia Edithen
dc.contributor.authorChoong, Cleo Swee Neoen
dc.date.accessioned2013-12-05T01:47:32Zen
dc.date.accessioned2019-12-06T19:34:34Z-
dc.date.available2013-12-05T01:47:32Zen
dc.date.available2019-12-06T19:34:34Z-
dc.date.copyright2013en
dc.date.issued2013en
dc.identifier.citationMaleksaeedi, S., Wang, J. K., El-Hajje, A., Harb, L., Guneta, V., He, Z., et al. (2013). Toward 3D printed bioactive titanium scaffolds with bimodal pore size distribution for bone ingrowth. Procedia CIRP, 5, 158-163.en
dc.identifier.issn2212-8271en
dc.identifier.urihttps://hdl.handle.net/10356/96754-
dc.identifier.urihttp://hdl.handle.net/10220/18051en
dc.description.abstractInkjet 3D printing as a versatile rapid manufacturing method was utilized for making titanium scaffolds with customized pores and geometry. A suitable binder/powder/solvent system was employed to make titanium printable and the parts were subjected to a firing process for strengthening. Mechanical stiffness of the part was tailored by varying printing and sintering parameters to meet that of the bone. Since titanium is inherently bioinert, the bioactivity of the parts was enhanced by surface modification of internal channels by electrochemical deposition of hydroxyapatite or hydrothermal treatment to form titania on the surface.en
dc.language.isoenen
dc.relation.ispartofseriesProcedia CIRPen
dc.rights© 2013 The Authors. Published by Elsevier B.V. This paper was published in Procedia CIRP and is made available as an electronic reprint (preprint) with permission of the authors. The paper can be found at the following official DOI: [http://dx.doi.org/10.1016/j.procir.2013.01.032]. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en
dc.subjectDRNTU::Engineering::Materialsen
dc.titleToward 3D printed bioactive titanium scaffolds with bimodal pore size distribution for bone ingrowthen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Materials Science and Engineeringen
dc.contributor.organizationA*STAR SIMTechen
dc.identifier.doihttp://dx.doi.org/10.1016/j.procir.2013.01.032en
dc.description.versionPublished Versionen
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:MSE Journal Articles

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.