Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/97196
Full metadata record
DC FieldValueLanguage
dc.contributor.authorJena, Rajeeb Kumaren
dc.contributor.authorDev, Kapilen
dc.contributor.authorYue, Chee Yoonen
dc.contributor.authorAsundi, Anand Krishnaen
dc.date.accessioned2013-06-25T03:17:44Zen
dc.date.accessioned2019-12-06T19:40:06Z-
dc.date.available2013-06-25T03:17:44Zen
dc.date.available2019-12-06T19:40:06Z-
dc.date.copyright2012en
dc.date.issued2012en
dc.identifier.citationJena, R. K., Dev, K., Yue, C. Y., & Asundi, A. K. (2012). Effect of residual stresses in injection molded cyclic olefin copolymer during microfabrication : hot embossing as well as thermal bonding. RSC advances, 2(13), 5717-5728.en
dc.identifier.issn2046-2069en
dc.identifier.urihttps://hdl.handle.net/10356/97196-
dc.description.abstractMicrofabrication using replication techniques such as hot embossing and injection molding followed by thermal sealing with a cover plate have been widely used in the large scale manufacturing of polymer based micro-devices for bio and chemical-MEMS (Micro Electro Mechanical Systems) applications. While several parameters are known to affect the integrity of microchannel replication, they have not been characterized and studied. These parameters include the influence of (i) in built residual stresses in substrate materials, made by injection molding, on replication fidelity during microfabrication using the hot embossing technique, (ii) sealing of injection molded microchips during thermal bonding and (iii) replication fidelity of annealed and unannealed substrates during hot embossing. This is the focus of the current work. Residual stresses were analysed using a grey-field polariscope and the fidelity of microreplication was characterized using a PLμ confocal microscope and a scanning electron microscope. It was found that the significant variation in replication fidelity of the injection molded substrate correlated well with the observed differences in the distribution of residual stresses. Good replication was obtained in regions with low residual stresses. The annealed substrate which had a low residual stress state with little chain orientation exhibited no variation in replication fidelity both along and across the flow direction of the injection molded substrate. Furthermore, the microchannels in the unannealed injection molding substrate exhibited significant distortion and deformation during subsequent thermal bonding.en
dc.language.isoenen
dc.relation.ispartofseriesRSC advancesen
dc.rights© 2012 The Royal Society of Chemistry.en
dc.titleEffect of residual stresses in injection molded cyclic olefin copolymer during microfabrication : hot embossing as well as thermal bondingen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.contributor.researchSingapore-MIT Alliance, Manufacturing Systems and Technology Programmeen
dc.identifier.doi10.1039/c2ra20159cen
item.fulltextNo Fulltext-
item.grantfulltextnone-
Appears in Collections:MAE Journal Articles

SCOPUSTM   
Citations 50

3
Updated on Feb 25, 2021

PublonsTM
Citations 50

3
Updated on Feb 27, 2021

Page view(s) 20

508
Updated on Feb 28, 2021

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.