Please use this identifier to cite or link to this item:
Title: Effect of residual stresses in injection molded cyclic olefin copolymer during microfabrication : hot embossing as well as thermal bonding
Authors: Jena, Rajeeb Kumar
Dev, Kapil
Yue, Chee Yoon
Asundi, Anand Krishna
Issue Date: 2012
Source: Jena, R. K., Dev, K., Yue, C. Y., & Asundi, A. K. (2012). Effect of residual stresses in injection molded cyclic olefin copolymer during microfabrication : hot embossing as well as thermal bonding. RSC advances, 2(13), 5717-5728.
Series/Report no.: RSC advances
Abstract: Microfabrication using replication techniques such as hot embossing and injection molding followed by thermal sealing with a cover plate have been widely used in the large scale manufacturing of polymer based micro-devices for bio and chemical-MEMS (Micro Electro Mechanical Systems) applications. While several parameters are known to affect the integrity of microchannel replication, they have not been characterized and studied. These parameters include the influence of (i) in built residual stresses in substrate materials, made by injection molding, on replication fidelity during microfabrication using the hot embossing technique, (ii) sealing of injection molded microchips during thermal bonding and (iii) replication fidelity of annealed and unannealed substrates during hot embossing. This is the focus of the current work. Residual stresses were analysed using a grey-field polariscope and the fidelity of microreplication was characterized using a PLμ confocal microscope and a scanning electron microscope. It was found that the significant variation in replication fidelity of the injection molded substrate correlated well with the observed differences in the distribution of residual stresses. Good replication was obtained in regions with low residual stresses. The annealed substrate which had a low residual stress state with little chain orientation exhibited no variation in replication fidelity both along and across the flow direction of the injection molded substrate. Furthermore, the microchannels in the unannealed injection molding substrate exhibited significant distortion and deformation during subsequent thermal bonding.
ISSN: 2046-2069
DOI: 10.1039/c2ra20159c
Schools: School of Mechanical and Aerospace Engineering 
Research Centres: Singapore-MIT Alliance, Manufacturing Systems and Technology Programme 
Rights: © 2012 The Royal Society of Chemistry.
Fulltext Permission: none
Fulltext Availability: No Fulltext
Appears in Collections:MAE Journal Articles

Citations 50

Updated on Sep 26, 2023

Web of ScienceTM
Citations 50

Updated on Sep 27, 2023

Page view(s) 10

Updated on Sep 27, 2023

Google ScholarTM




Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.