Please use this identifier to cite or link to this item:
Title: Probabilistic assessment of stability of underground rock caverns and cavern shape optimization
Authors: Wong, J. Y. K.
Goh, Anthony Teck Chee
Zhang, Wengang
Keywords: DRNTU::Engineering::Civil engineering
Issue Date: 2011
Source: Zhang, W., Goh, A. T. C., & Wong, J. Y. K. (2011). Probabilistic assessment of stability of underground rock caverns and cavern shape optimization. Harmonising Rock Engineering and the Environment, 12th ISRM International Congress on Rock Mechanics (Beijing, China, 2011).
Abstract: The global stability of underground rock cavern excavated in a Mohr-Coulomb material is investigated by means of Universal Distinct Element Code (UDEC) in this paper. The following stochastic variables are considered: the friction angle, the cohesion, the deformation modulus of the rock mass and the in-situ stress ratio. The overburden thickness, the unit weight of rock materials, the Poisson’s ratio and the joint strength are assumed as deterministic. The cavern width and height are also assumed as uncertain variables in order to optimize the shape of the rock cavern. Most cavern shapes are horse-shoe or bullet-head shaped. It is widely argued that the use of a flat-arch cavern would make the best use of cavern space. Thus for this study, the initial cavern width and height are set as 30m and 18m, respectively. The influences of the flattening process on cavern stability can be investigated through incremental increases in the cavern width and reduction in the cavern height through six design levels to assess the changes of safety factor and probability of failure. For each configuration of the six levels, the probability of failure is determined by Monte Carlo simulation incorporated by neural network results. The configuration satisfying the critical safety factor and the expected performance level with the flattest cavern roof can be termed as the optimal design. It is also suggested that the critical factor of safety and the targeted performance level be used together, as complementary measures of acceptable design.
DOI: 10.1201/b11646-349
Rights: © 2011 Taylor & Francis Group. This is the author created version of a work that has been peer reviewed and accepted for publication by 12th ISRM International Congress on Rock Mechanics, Taylor & Francis Group. It incorporates referee’s comments but changes resulting from the publishing process, such as copyediting, structural formatting, may not be reflected in this document. The published version is available at:
Fulltext Permission: none
Fulltext Availability: No Fulltext
Appears in Collections:CEE Conference Papers

Page view(s) 5

Updated on Feb 2, 2023

Google ScholarTM




Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.