Please use this identifier to cite or link to this item:
|Title:||Fabrication and upconversion luminescence of highly transparent Er:YAG ceramics||Authors:||Qin, Xianpeng
Wang, Shi Wei
|Issue Date:||2012||Source:||Qin, X. P., Zhang, J., Yang, H., Luo, D. W., Ma, J., Tang, D., & Wang, S. W. (2012). Fabrication and upconversion luminescence of highly transparent Er:YAG ceramics. Solid state phenomena, 18555-59.||Series/Report no.:||Solid state phenomena||Abstract:||Highly transparent Er:YAG ceramics with different Er concentration were fabricated by a solid-state reaction and vacuum sintering method. The optical properties, the microstructure and the upconversion luminescence of the Er:YAG ceramics were investigated. For 3 mm thick samples, the in-line transmittances of the as-fabricated Er:YAG ceramics at the wavelength of 1100 nm and 400 nm were about 84% and 82%, respectively, which was very close to the theoretical transmittance of YAG ceramics. The micrograph of the Er:YAG transparent ceramics exhibited a pore-free structure and the average grain size was about 10 μm. The grain boundary of the ceramics was clean and no secondary phase was detected. When pumped by a 980 nm LD, the strong green and red upconversion luminescences in the Er:YAG ceramics were observed. The different upconversion mechanisms depending on Er concentration in the Er:YAG ceramics were also discussed.||URI:||https://hdl.handle.net/10356/97652
|DOI:||10.4028/www.scientific.net/SSP.185.55||Fulltext Permission:||none||Fulltext Availability:||No Fulltext|
|Appears in Collections:||TL Journal Articles|
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.