Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/98021
Full metadata record
DC FieldValueLanguage
dc.contributor.authorZhang, Runqien
dc.contributor.authorZhu, Leien
dc.date.accessioned2013-07-25T06:09:07Zen
dc.date.accessioned2019-12-06T19:49:43Z-
dc.date.available2013-07-25T06:09:07Zen
dc.date.available2019-12-06T19:49:43Z-
dc.date.copyright2012en
dc.date.issued2012en
dc.identifier.citationZhang, R., & Zhu, L. (2012). Microstrip Bandpass filters using triple-mode patch-loaded cross resonator. Progress In Electromagnetics Research Letters, 30, 13-20.en
dc.identifier.issn1937-6480en
dc.identifier.urihttps://hdl.handle.net/10356/98021-
dc.description.abstractMicrostrip bandpass filters using a triple-mode patch-loaded cross resonator are presented in this work. First, a square patch is added at the center of a cross resonator to separate the resonant frequencies of the 1st and 2nd modes. Then, a pair of narrow slots is etched into the square patch along its symmetrical plane to split the 1st resonant mode and its degenerate mode. By changing the patch size and the slot length, the above three modes are appropriately adjusted. Two prototype filters with open-ended and stub-loaded coupled-lines are designed and fabricated to verify the design principle and to further suppress the lowest harmonic passband, respectively. Predicted results agree well with the measured ones.en
dc.language.isoenen
dc.relation.ispartofseriesProgress In electromagnetics research lettersen
dc.rights© 2012 EMW Publishing. This paper was published in Progress In Electromagnetics Research Letters and is made available as an electronic reprint (preprint) with permission of EMW Publishing. The paper can be found at the following official DOI: [http://dx.doi.org/10.2528/PIERL11121506]. One print or electronic copy may be made for personal use only. Systematic or multiple reproduction, distribution to multiple locations via electronic or other means, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper is prohibited and is subject to penalties under law.en
dc.subjectDRNTU::Engineering::Electrical and electronic engineeringen
dc.titleMicrostrip bandpass filters using triple-mode patch-loaded cross resonatoren
dc.typeJournal Articleen
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen
dc.identifier.doi10.2528/PIERL11121506en
dc.description.versionPublished versionen
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:EEE Journal Articles
Files in This Item:
File Description SizeFormat 
Microstrip bandpass filters using triple-mode patch-loaded cross resonator.pdf306.27 kBAdobe PDFThumbnail
View/Open

SCOPUSTM   
Citations

1
checked on Sep 4, 2020

WEB OF SCIENCETM
Citations

1
checked on Sep 19, 2020

Page view(s)

252
checked on Sep 24, 2020

Download(s)

228
checked on Sep 24, 2020

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.