Please use this identifier to cite or link to this item:
https://hdl.handle.net/10356/98491| Title: | Measurement of output driver impedance for signal integrity design consideration | Authors: | Chang, Richard Weng Yew See, Kye Yak Soh, Wei-Shan Oswal, Manish Wang, Lin Biao |
Keywords: | DRNTU::Engineering::Electrical and electronic engineering::Electronic systems::Signal processing | Issue Date: | 2009 | Source: | Chang, R. W. Y., See, K. Y., Soh, W. S., Oswal, M., & Wang, L. B. (2009). Measurement of output driver impedance for signal integrity design consideration. In proceedings of the Asia Pacific Microwave Conference: Singapore, (pp.665-668). | Conference: | Asia Pacific Microwave Conference (2009 : Singapore) | Abstract: | Impedance matching is crucial in high-speed digital design to ensure signal integrity (SI). Accurate information of a device’s output impedance allows precise selection of series resistor to match the device’s output to the characteristic impedance of the connecting trace. This paper proposes an incircuit measurement technique using two current probes to extract the output impedance information of an active device under its normal operating conditions. The measured impedance has been validated with the time-domain simulation results obtained from CST Design Studio. | URI: | https://hdl.handle.net/10356/98491 http://hdl.handle.net/10220/6391 |
DOI: | 10.1109/APMC.2009.5384220 | Schools: | School of Electrical and Electronic Engineering | Organisations: | Guided Systems Division, DSO National Laboratories | Rights: | © 2009 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. http://www.ieee.org/portal/site This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder. | Fulltext Permission: | open | Fulltext Availability: | With Fulltext |
| Appears in Collections: | EEE Conference Papers |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| Measurement of output driver impedance for signal integrity design consideration.pdf | 768.56 kB | Adobe PDF |  View/Open |
Page view(s) 1
1,898
Updated on Mar 16, 2025
Download(s) 5
767
Updated on Mar 16, 2025
Google ScholarTM
Check
Altmetric
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.