Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/98806
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAhmad, Iram Razaen
dc.contributor.authorShu, Dong Weien
dc.date.accessioned2013-07-31T02:47:52Zen
dc.date.accessioned2019-12-06T19:59:50Z-
dc.date.available2013-07-31T02:47:52Zen
dc.date.available2019-12-06T19:59:50Z-
dc.date.copyright2012en
dc.date.issued2012en
dc.identifier.citationAhmad, I. R.,& Shu, D. W. (2012). Anisotropic Behaviour of AZ31B Sheet at High Strain Rates. Applied Mechanics and Materials, 151, 726-730.en
dc.identifier.issn1662-7482en
dc.identifier.urihttps://hdl.handle.net/10356/98806-
dc.identifier.urihttp://hdl.handle.net/10220/12540en
dc.description.abstractThe anisotropic effects on the mechanical response of AZ31B sheet at high strain rates have been analyzed. The experimental results indicate that the stress-strain behaviour of the alloy is highly anisotropic and rate sensitive. However, anisotropy of the mechanical properties of the alloy is less significant at higher strain rates. Under tensile loading, the anisotropic behaviour of the alloy is less significant as compare to its behaviour under compression. In both compression and tensile loading the alloy shows significant rate sensitivity as compare to quasi-static strain rates but at higher rates it is less significant. The maximum stress is observed to reach nearly 600 MPa for transverse direction impact. The tension-compression asymmetry is observed in the alloy.en
dc.language.isoenen
dc.relation.ispartofseriesApplied mechanics and materialsen
dc.titleAnisotropic behaviour of AZ31B sheet at high strain ratesen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.identifier.doihttp://dx.doi.org/10.4028/www.scientific.net/AMM.151.726en
item.grantfulltextnone-
item.fulltextNo Fulltext-
Appears in Collections:MAE Journal Articles

Google ScholarTM

Check

Altmetric

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.