Please use this identifier to cite or link to this item:
|Title:||A hybrid dynamic condenser model for transient analysis and model-based controller design||Authors:||Ding, Xudong
|Issue Date:||2012||Source:||Ding, X., Duan, P., Cai, W., & Yan, J. (2012). A hybrid dynamic condenser model for transient analysis and model-based controller design. 2012 7th IEEE Conference on Industrial Electronics and Applications (ICIEA), 1124 - 1129.||Abstract:||In this paper, a hybrid modeling approach is proposed to describe the dynamic behavior of the two phase flow condensers used in air-conditioning and refrigeration systems. The model is formulated based on fundamental energy and mass balance governing equations, and thermodynamic principles, while some constants and less important variables that change very little during normal operation, such as cross-sectional areas, mean void fraction, the derivative of the saturation enthalpy with respect to pressure, etc., are lumped into several unknown parameters. These parameters are then obtained by experimental data using least squares identification method. The proposed modeling method takes advantages of both physical and empirical modeling approaches, can accurately predict the transient behaviors in real-time and significantly reduce the computational burden. Other merits of the proposed approach are that the order of the model is very low and all the state variables can be easily measured. These advantages make it easy to be applied to model based control system design. The model validation studies on an experimental system show that the model predicts the system dynamic well.||URI:||https://hdl.handle.net/10356/98953
|DOI:||10.1109/ICIEA.2012.6360892||Fulltext Permission:||none||Fulltext Availability:||No Fulltext|
|Appears in Collections:||EEE Conference Papers|
Page view(s) 10686
Updated on Jan 30, 2023
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.