Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/99159
Full metadata record
DC FieldValueLanguage
dc.contributor.authorLiu, Yupingen
dc.contributor.authorHuang, Kaien
dc.contributor.authorGao, Tianen
dc.contributor.authorYang, Liwenen
dc.contributor.authorFan, Yuen
dc.contributor.authorZhang, Qingen
dc.contributor.authorSun, Fuen
dc.contributor.authorZhong, Jianxinen
dc.date.accessioned2013-10-30T04:48:18Zen
dc.date.accessioned2019-12-06T20:03:58Z-
dc.date.available2013-10-30T04:48:18Zen
dc.date.available2019-12-06T20:03:58Z-
dc.date.copyright2013en
dc.date.issued2013en
dc.identifier.citationLiu, Y., Huang, K., Fan, Y., Zhang, Q., Sun, F., Gao, T., et al. (2013). Three-dimensional network current collectors supported Si nanowires for lithium-ion battery applications. Electrochimica acta, 88, 766-771.en
dc.identifier.issn0013-4686en
dc.identifier.urihttps://hdl.handle.net/10356/99159-
dc.identifier.urihttp://hdl.handle.net/10220/17057en
dc.description.abstractThree-dimensional (3D) conductive network electrodes based on commercial nickel foam current collector supported Si nanowires (SiNWs) with carbon coating are evaluated as lithium-ion battery anodes. The Ni foam network current collector achieves a high silicon loading up to 5 mg/cm2, without using any non-conductive binders. The pressed carbon coated SiNWs–Ni electrode shows outstanding electrochemical performance. It achieves an initial capacity of as high as 2486 mAh/g. A reversible capacity of 1500 mAh/g is still retained even after 50 cycles of charging and discharging. The good performance could be attributed to the 3D Ni–C network current collector structure that provides flexible room to effectively accommodate the volume change of Si nanowires and minimizes loss of electrical contact after long time cycling. The 3D composite network provides a new design principle of robust and scalable lithium-ion battery electrodes that can effectively relieve the significant volume change problem.en
dc.language.isoenen
dc.relation.ispartofseriesElectrochimica actaen
dc.subjectDRNTU::Engineering::Electrical and electronic engineeringen
dc.titleThree-dimensional network current collectors supported Si nanowires for lithium-ion battery applicationsen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen
dc.identifier.doi10.1016/j.electacta.2012.10.129en
item.fulltextNo Fulltext-
item.grantfulltextnone-
Appears in Collections:EEE Journal Articles

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.