Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/99254
Full metadata record
DC FieldValueLanguage
dc.contributor.authorZhang, Runqien
dc.contributor.authorZhu, Leien
dc.date.accessioned2013-09-13T02:00:11Zen
dc.date.accessioned2019-12-06T20:05:07Z-
dc.date.available2013-09-13T02:00:11Zen
dc.date.available2019-12-06T20:05:07Z-
dc.date.copyright2012en
dc.date.issued2012en
dc.identifier.urihttps://hdl.handle.net/10356/99254-
dc.description.abstractA microstrip triple-mode bandpass filter using a single patch-loaded cross resonator is reported in this work. First, a square patch is added at the center of a cross resonator, which separates the resonant frequencies of the first and second modes. Then, a pair of slots is etched into the square patch, which splits the first pair of degenerate modes. By appropriately adjusting the patch size and the slot length, these three resonant modes are individually controlled. To feed the proposed resonator, two stub-loaded coupled lines are used to provide a required coupling degree and to suppress the lowest harmonic passband. Predicted results are well confirmed with the experimental ones.en
dc.language.isoenen
dc.rights© 2012 IEEEen
dc.subjectDRNTU::Engineering::Electrical and electronic engineeringen
dc.titleA new triple-mode microstrip bandpass filter using a patch-loaded cross resonatoren
dc.typeConference Paperen
dc.contributor.schoolSchool of Electrical and Electronic Engineeringen
dc.contributor.conferenceIEEE MTT-S International Microwave Symposium Digest (2012 : Montreal, Canada)en
dc.identifier.doi10.1109/MWSYM.2012.6258267en
item.fulltextNo Fulltext-
item.grantfulltextnone-
Appears in Collections:EEE Conference Papers

SCOPUSTM   
Citations 20

9
Updated on Dec 2, 2022

Page view(s) 50

432
Updated on Dec 8, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.