Please use this identifier to cite or link to this item:
|Title:||Rate-dependent constitutive modeling of polymer subjected to dynamic loading||Authors:||Yuan, Jian Ming
Liu, Jian Fei
Tan, Geoffrey E. B.
|Keywords:||DRNTU::Engineering::Materials||Issue Date:||2012||Source:||Yuan, J. M., Ma, J., Tan, G. E. B., & Liu, J. F. (2012). Rate-dependent constitutive modeling of polymer subjected to dynamic loading. Solid state phenomena, 185, 119-121.||Series/Report no.:||Solid state phenomena||Abstract:||This paper proposes an effective and systematical method to obtain reliable rate-dependent material models used in FEM simulation for polymers. Compressive stress-strain curves of two types of polymer are obtained at different strain rates. Rate-dependent elastic-plastic models are applied to describe the observed rate-dependent behaviors, whereby the input data of material model are determined from the test data obtained. Verification of the material models is proposed via comparing FEM simulation with test data of quasi-static tension tests and dynamic compression tests of different strain rates.||URI:||https://hdl.handle.net/10356/99528
|DOI:||10.4028/www.scientific.net/SSP.185.119||Fulltext Permission:||none||Fulltext Availability:||No Fulltext|
|Appears in Collections:||TL Journal Articles|
Page view(s) 20564
Updated on Feb 5, 2023
Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.