Please use this identifier to cite or link to this item: https://hdl.handle.net/10356/99958
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGe, Xiaomingen
dc.contributor.authorFu, C.en
dc.contributor.authorChan, S. H.en
dc.contributor.authorLiu, Q.en
dc.date.accessioned2013-10-04T04:52:20Zen
dc.date.accessioned2019-12-06T20:14:01Z-
dc.date.available2013-10-04T04:52:20Zen
dc.date.available2019-12-06T20:14:01Z-
dc.date.copyright2012en
dc.date.issued2012en
dc.identifier.citationFu, C., Ge, X., Chan, S. H., & Liu, Q. (2012). Fabrication and characterization of anode-supported low-temperature SOFC based on Gd-Doped Ceria electrolyte. Fuel cells, 12(3), 450-456.en
dc.identifier.urihttps://hdl.handle.net/10356/99958-
dc.description.abstractLarge-size, 9.5 cm × 9.5 cm, Ni-Gd0.1Ce0.9O1.95 (Ni-GDC) anode-supported solid oxide fuel cell (SOFC) has been successfully fabricated with NiO-GDC anode substrate prepared by tape casting method and thin-film GDC electrolyte fabricated by screen-printing method. Influence of the sintering shrinkage behavior of NiO-GDC anode substrate on the densification of thin GDC electrolyte film and on the flatness of the co-sintered electrolyte/anode bi-layer was studied. The increase in the pore-former content in the anode substrate improved the densification of GDC electrolyte film. Pre-sintering temperature of the anode substrate was optimized to obtain a homogeneous electrolyte film, significantly reducing the mismatch between the electrolyte and anode substrate and improving the electrolyte quality. Dense GDC electrolyte film and flat electrolyte/anode bi-layer can be fabricated by adding 10 wt.% of pore-former into the composite anode and pre-sintering it at 1,100 °C for 2 h. Composite cathode, La0.6Sr0.4Fe0.8Co0.2O3, and GDC (LSCF-GDC), was screen-printed on the as-prepared electrolyte surface and sintered to form a complete single cell. The maximum power density of the single cell reached 497 mW cm–2 at 600 °C and 953 mW cm–2 at 650 °C with hydrogen as fuel and air as oxidant.en
dc.language.isoenen
dc.relation.ispartofseriesFuel cellsen
dc.subjectDRNTU::Engineering::Mechanical engineeringen
dc.titleFabrication and characterization of anode-supported low-temperature SOFC based on Gd-Doped Ceria electrolyteen
dc.typeJournal Articleen
dc.contributor.schoolSchool of Mechanical and Aerospace Engineeringen
dc.identifier.doi10.1002/fuce.201100142en
item.fulltextNo Fulltext-
item.grantfulltextnone-
Appears in Collections:MAE Journal Articles

SCOPUSTM   
Citations 20

10
Updated on Dec 2, 2022

Web of ScienceTM
Citations 20

9
Updated on Nov 28, 2022

Page view(s) 20

648
Updated on Dec 6, 2022

Google ScholarTM

Check

Altmetric


Plumx

Items in DR-NTU are protected by copyright, with all rights reserved, unless otherwise indicated.