Search
Now showing items 1-10 of 14
A miniaturized silicon-based ground ring guarded patch resonator and filter
(2005)
A new miniaturized ground ring guided microstrip patch filter developed on the silicon wafer using micromachined technology is reported. The ground shunt can be used to lower the operating frequency up to one-third as ...
Body-bootstrapped-buffer circuit for CMOS static power reduction
(2008)
In this paper, we present a new CMOS circuit design for increasing the threshold voltages (VT) of MOSFETS to reduce power consumption. Using a single voltage source VDD, the proposed circuit generates both the high positive ...
Power-efficient explicit-pulsed dual-edge triggered sense-amplifier flip-flops
(2009)
A novel explicit-pulsed dual-edge triggered sense-amplifier
flip-flop (DET-SAFF) for low-power and high-performance
...
Sub-mW multi-GHz CMOS dual-modulus prescalers based on programmable injection-locked frequency dividers
(2008)
Dual-modulus prescalers based on
programmable Injection-Locked Frequency Dividers
(ILFDs) are ...
A fully-integrated low power PAM/PPM multi-channel UWB transmitter
(2009)
A new transmitter for ultra-wideband (UWB)
impulse radio is described in this paper. The proposed
architecture features the simple design, low-power operation, and
enables the ...
9.3–10.4-GHz-band cross-coupled complementary oscillator with low phase-noise performance
(2004)
A fully integrated 10-GHz-band voltage-controlled oscillator (VCO) has been designed and fabricated using
commercial 0.18- m CMOS technology. The complementary cross-coupled differential topology is adopted ...
A full current-mode sense amplifier for low-power SRAM applications
(2008)
A full current-mode sense amplifier is presented. It
extensively utilizes the cross-coupled inverters for both local and
global sensing stages, hence achieving ultra low-power and ultra
...
A high-speed twin-capacitor BiNMOS (TC-BiNMOS) logic circuit for single battery operation
(2001)
This paper presents a novel BiNMOS logic gate specially designed for single battery operation (1.2-1.5 V). Through the use of two capacitors, in the pre-charging and bootstrapping cycles, the circuit achieves a high-speed ...
Design of a low power wide-band high resolution programmable frequency divider
(2005)
The design of a high-speed wide-band high resolution programmable frequency divider is investigated. A new reloadable D flip-flop for the high speed programmable frequency divider is proposed. It is optimized in terms of ...
A subthreshold low-noise amplifier optimized for ultra-low-power applications in the ISM band
(2008)
The IEEE 802.15.4 standard relaxes the requirements on the receiver front-end making subthreshold operation a viable
solution. The specification is discussed and guidelines are presented for a small area ultra-low-power ...
