Search:

Start a new search
Add/Remove Filters (1 filters currently applied)

Results 1-25 of 25 (Search time: 0.334 seconds).
 |  Relevance

 

  • previous
  • 1
  • next
Item hits:
Issue DateTitleAuthor(s)
1 2023Mechanism and design of fluid catalytic cracking ash-blended cementitious composites for high performance printingLu, Bing; Li, Hongliang; Li, Mingyang; Wong, Teck Neng; Qian, Shunzhi
22018Effect of spray-based printing parameters on cementitious material distributionLu, Bing; Li, Mingyang; Lao, Wenxin; Weng, Yiwei; Qian, Shunzhi; Tan, Ming Jen; Leong, Kah Fai
3 2021Fouling mitigation in reverse osmosis processes with 3D printed sinusoidal spacersKoo, Jing Wee; Ho, Jia Shin; Tan, Yong Zen; Tan, Wen See; An, Jia; Zhang, Yi; Chua, Chee Kai; Chong, Tzyy Haur
4 2022A comparative study on environmental performance of 3D printing and conventional casting of concrete products with industrial wastesLiu, Siyu; Lu, Bing; Li, Hongliang; Pan, Zehua; Jiang, Jingjing; Qian, Shunzhi
52021Effect of printing parameters on material distribution in spray-based 3D concrete printing (S-3DCP)Lu, Bing; Li, Mingyang; Wong, Teck Neng; Qian, Shunzhi
62021Potential of printed electrodes for electrochemical impedance spectroscopy (EIS) : toward membrane fouling detectionGoh, Guo Liang; Tay, Ming Feng; Lee, Jia Min; Ho, Jia Shin; Sim, Lee Nuang; Yeong, Wai Yee; Chong, Tzyy Haur
72021Use of magnesium-silicate-hydrate (M-S-H) cement mixes in 3D printing applicationsPanda, Biranchi; Sonat, Cem; Yang, En-Hua; Tan, Ming Jen; Unluer, Cise
82020Study of MgO-activated slag as a cementless material for sustainable spray-based 3D printingLu, Bing; Zhu, Weiping; Weng, Yiwei; Liu, Zhixin; Yang, En-Hua; Leong, Kah Fai; Tan, Ming Jen; Wong, Teck Neng; Qian, Shunzhi
92018Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy modelWeng, Yiwei; Li, Mingyang; Tan, Ming Jen; Qian, Shunzhi
102019Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printingPanda, Biranchi; Unluer, Cise; Tan, Ming Jen
112019A systematical review of 3D printable cementitious materialsLu, Bing; Weng, Yiwei; Li, Mingyang; Qian, Ye; Leong, Kah Fai; Tan, Ming Jen; Qian, Shunzhi
122019Synthesis and characterization of one-part geopolymers for extrusion based 3D concrete printingPanda, Biranchi; Singh, GVP Bhagath; Unluer, Cise; Tan, Ming Jen
13 2021A review on spacers and membranes: conventional or hybrid additive manufacturing?Koo, Jing Wee; Ho, Jia Shin; An, Jia; Zhang, Yi; Chua, Chee Kai; Chong, Tzyy Haur
14 2019Enhancing fouling mitigation of submerged flat-sheet membranes by vibrating 3D-spacersTan, Yong Zen; Mao, Ziming; Zhang, Yanjun; Tan, Wen See; Chong, Tzyy Haur; Wu, Bing; Chew, Jia Wei
15 2019The use of microbial induced carbonate precipitation in healing cracks within reactive magnesia cement-based blendsRuan, Shaoqin; Qiu, Jishen; Weng, Yiwei; Yang, Yang; Yang, En-Hua; Chu, Jian; Unluer, Cise
162020Comparative economic, environmental and productivity assessment of a concrete bathroom unit fabricated through 3D printing and a precast approachWeng, Yiwei; Li, Mingyang; Ruan, Shaoqin; Wong, Teck Neng; Tan, Ming Jen; Ow Yeong, Kah Leong; Qian, Shunzhi
172018Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clayPanda, Biranchi; Ruan, Shaoqin; Unluer, Cise; Tan, Ming Jen
182018Empirical models to predict rheological properties of fiber reinforced cementitious composites for 3D printingWeng, Yiwei; Lu, Bing; Li, Mingyang; Liu, Zhixin; Tan, Ming Jen; Qian, Shunzhi
19 2021Sustainable high strength, high ductility engineered cementitious composites (ECC) with substitution of cement by rice husk ashZhang, Zhigang; Liu, Siyu; Yang, Fan; Weng, Yiwei; Qian, Shunzhi
202019Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printingWeng, Yiwei; Ruan, Shaoqin; Li, Mingyang; Mo, Liwu; Unluer, Cise; Tan, Ming Jen; Qian, Shunzhi
2120213D printing of multilayered and multimaterial electronics : a reviewGoh, Guo Liang; Zhang, Haining; Chong, Tzyy Haur; Yeong, Wai Yee
222018Printability and fire performance of a developed 3D printable fibre reinforced cementitious composites under elevated temperaturesWeng, Yiwei; Li, Mingyang; Liu, Zhixin; Lao, Wenxin; Lu, Bing; Zhang, Dong; Tan, Ming Jen
232019Designing spray-based 3D printable cementitious materials with fly ash cenosphere and air entraining agentLu, Bing; Qian, Ye; Li, Mingyang; Weng, Yiwei; Leong, Kah Fai; Tan, Ming Jen; Qian, Shunzhi
242021Investigation of interlayer adhesion of 3D printable cementitious material from the aspect of printing processWeng, Yiwei; Li, Mingyang; Zhang, Dong; Tan, Ming Jen; Qian, Shunzhi
252021Extracting BIM information for lattice toolpath planning in digital concrete printing with developed dynamo script : a case studyWeng, Yiwei; Noor Mohamed, Nisar Ahamed; Lee, Brian Jia Shen; Gan, Nicole Jia Hui; Li, Mingyang; Tan, Ming Jen; Li, Heng; Qian, Shunzhi
Results 1-25 of 25 (Search time: 0.334 seconds).

 

  • previous
  • 1
  • next